The CP370 EPS polystyrene compactor will process 100 to 200 kg (10 to 20 cubic metres) of loose polystyrene per hour.

It features the unique cooling jacket and high impact pre-crush which breaks up large pieces of EPS automatically before compacting them into blocks in the output channel.


CP370 EPS Polystyrene Compactor: capacity 10 to 20 cubic metres per hour

High Volume
CP370 EPS Compactor


  • Capacity: 10 to 20 m³ per hour of loose polystyrene
  • Dimensions of feed aperture: 900mm (W) x 1000mm (D)
  • Overall dimensions: 4382mm (W) x 1650mm with feed chute (D) x 1850mm (H) - Hopper depth: 900mm;
  • Loading height: 1650mm
  • Block size: 370mm x 370mm x variable length
  • Power required: 63A 3-phase with a 5-pin (red) plug with neutral and earth
  • Motor: 15kW
  • Pressure control: automatic

Accessories and features

  • Unique Cooling Jacket: this is a unique feature not seen on other models. The CP370 is a cold compaction compactor so no heat is applied but high pressures increase the temperature in the output channel. The cooling jacket keeps the temperature regulated, reducing the likelihood of material meltdowns and enabling the machine to work longer hours when other models need to be turned off for several hours to cool down.
  • Pre-crush in the hopper: the high impact pre-crush in the hopper breaks up any pieces which can fit in the hopper so no manual breaking up of material before loading is required.

CP370 EPS Compactor: Left: compacted polystyrene block size of 370mm x 370mm; Middle: pre-crush knives at the bottom of the hopper break up large pieces of EPS so you don't have to; Right: unique cooling jacket which cools the compacting section of the output channel.

For more information call or fill out our contact form. and tell us more about your requirements.



CP250 EPS Compactor
SP200 EPS Compactor
Nationwide Service and Repair
Buy, Rent or Lease?

Latest from our blog